R-Drive Image is used to create a disk image files and data backup. A disk image file contains exact, "byte for byte" copy of a hard disk partition or disk ligicheskogo can be created without having to reboot the computer and with different levels of data compression. These drive image files can be stored in a variety of places, including removable media such as CD-R (W) / DVD, Iomega Zip or Jazz disks. The program restores the disk image on the original disk to another partition or free space on the disk without rebooting the system. Using R-Drive Image, you can completely and rapidly restore your system after heavy data loss caused by system failure, virus attack or hardware failure. You can also use R-Drive Image for mass system deployment when you need to install one, already configured system, many identical computers. In other words, you can manually setup one system only, create an image and then deploy it on other computers, saving time and money. If you need to restore only certain files, disk image can be attached as a virtual disk and with it, ie directly from the disk image, easily copied using Windows Explorer or other file utilities.
Simple and easy user interface - do not require in-depth computer management skills.
Performing Operations "on the fly": Image files are created without having to stop and restart the operating system Windows. In the process of creating an image and before the completion of all other disk writes are stored in the cache memory. Restoring an image is also carried out "on the fly" with the exception of the system partition. When restoring a system partition, you must restart the program in the pseudo-graphic mode directly from Windows Explorer or by using specially created startup disks (CD / DVD or floppy disk).
Compression of image files. To save disk space, files can be compressed.
Supports removable media devices. Image files can be stored on removable media devices such as CD-R (W) / DVD, Iomega Zip or Jazz disks.
Network Support Microsoft. Boot R-Drive Image CD / DVD version supports disk image file on a remote computer and restore from a remote computer on a local network in Microsoft (CIFS protocol).
Pseudo-graphic mode. Restart to the pseudo-graphic mode to restore to the system and other locked partitions directly from Windows. There is no need to use a bootable CD / DVD.
Full list of supported devices. Big list of hardware supported by the program. WATCH LIST
USB 2.0 devices support in the pseudo-graphic mode. While the cost of hard drives and removable drives is steadily decreasing, a removable USB 2.0 drive (flash drive) may be the most appropriate and reliable solution for backing up the system and other parts in laptop computers. No more having to use unreliable CD / DVD and slow CD / DVD recorders.
The bootable version. Special bootable disks (two floppy disks or one CD / DVD) created to restore the system partition.
Restore individual files and folders. A disk image can be connected as a virtual disk, read-only, and its content can be viewed and copied.
The separation of the image file. A disk image file can be split into several files to fit a storage medium.
Protecting a disc image. The image file can be password protected and contain comments.
Converting the file system. The file system of the restored disk can be converted to another one (FAT16 to FAT32 and vice versa).
Creating new partitions. These disk image can be restored to the free disk space. The size of the restored partition can be changed.
Replacement parts. These drive image can be restored on other existing partitions. The program can delete the existing partition and restore a disk image on that free space.
Disk to Disk copy. An entire disk can be copied to any other, the same or greater capacity.
Checking the created image. A disk image file can be checked for the correctness of its creation before it is stored and / or restored.
Schedule. The task of creating a disk image can be installed and executed at a certain time in the automatic mode.
Script creation for frequent or unattended actions. The program interface allows you to create scripts to automatically create an image file and appending data to an existing image file. Scripts are executed from the command line and such command can be included in any batch file.
Action Report. The program automatically creates and sends e-mail notification, and can run a utility when the disk image is successfully created or the operation of its creation failed.
Windows 9x/ME/NT4.0/2000/XP / 2003/Vista/2008/Windows 7 (including 64-bit) on Intel-compatible platform.
Administrator rights are required to install and run R-Drive Image for WinNT/2000/XP / 2003/Vista/2008/Windows 7.
Release date: 2012
Version: 4.7 Build 4736
Developer: R-Tools Technology Inc.
Bit depth: 32bit +64 bit
Compatibility with Vista: complete
Compatible with Windows 7 full time
Language: English Russia
RAR Passwors is: scenereleasing_and_providing_you_latest_stuff___saud_1
Download From NETLOAD
Download From RAPIDGATOR
NO MIRRORS PLEASE